← Back to Tools Home | Olutil Image Tools
🌐 English

ID Photo Maker

A passport photo is often rejected for small reasons: the head is a few millimetres too small, the background is off-white instead of pure white, or the print resolution is wrong. This tool crops your portrait to an official millimetre size, converts that size into exact pixels at 300 or 600 DPI, and replaces the background before download.

Pick a preset such as one-inch 25×35 mm, two-inch 35×49 mm, passport 33×48 mm, Schengen 35×45 mm or US visa 51×51 mm, then fine-tune the frame with draggable handles. Everything is rendered on your own device. All processing runs locally in your browser. Your data is not uploaded to any server. 100% Local

🪪 Upload a photo to make an ID photo

How to Use an ID Photo Maker

  1. Upload a portrait — click the drop zone, drag a JPG or PNG in, or paste with Ctrl/⌘+V.
  2. Choose the millimetre size — one-inch 25×35, two-inch 35×49, passport 33×48, Schengen 35×45 or US visa 51×51.
  3. Set the DPI — keep 300 for ordinary print shops and switch to 600 only when the form or lab asks for it.
  4. Remove the background if needed — enable the AI cutout when the wall behind you is not plain; the Fast model is enough for most portraits.
  5. Match the background colour — pick white, light grey, red or blue, or enter the exact hex value the office specifies.
  6. Place the head correctly — drag the selection so the face is centred, with a little headroom above the hair and the shoulders inside the frame.
  7. Resize with a corner handle — the preset ratio stays locked, so the crop cannot stretch or squash your face.
  8. Download the PNG — compare the pixel readout with the numbers printed on the application form before you print.

Which millimetre size do I need?

One-inch 25×35 mm is standard for Chinese ID cards and many exam registrations, while two-inch 35×49 mm appears on some visa and archive forms. Passport-style documents usually ask for 33×48 mm, 35×45 mm or 51×51 mm. Always start from the millimetre value printed on the form, not from a pixel number you found in a forum, because the printed size is what a clerk can actually measure with a ruler.

How DPI turns millimetres into pixels

DPI only controls how many pixels are packed into those printed millimetres. At 300 DPI, 25×35 mm becomes 295×413 px and 35×45 mm becomes 413×531 px; at 600 DPI the same photo doubles to 591×827 px and 827×1063 px. Upload a source at least as large as the final pixel size, otherwise the crop is enlarged and looks soft. A higher DPI setting never adds detail that the original photo did not contain.

Features

When to Use an ID Photo Maker

Passport and visa applications

Consulates publish strict rules about head size, background shade and even the amount of shadow on the face. Crop to the exact millimetre size, replace a busy wall with a plain background and keep a neutral expression. Print at 300 DPI on glossy paper, then compare the result with the checklist that came with the application. If the form also asks for a digital upload, check its pixel limits separately.

Exam registration and student cards

Exams and school systems often reuse ID photos for years, so a clean file is worth keeping. One-inch and two-inch sizes cover most Chinese registration forms, while some international tests ask for 33×48 mm or a square frame. Save one PNG at the required pixel size and a second copy at home; the correct proportions make later reprints predictable instead of another hurried crop.

Staff badges and internal directories

Company badges, access cards and staff pages look inconsistent when every photo uses a different ratio. Standardise on one preset, a white or light grey background and the same DPI, then reuse the setting for each new colleague. A uniform crop also reduces work for whoever prints the badge sheets, because the images drop into the template without manual resizing.

FAQ

What is the difference between one-inch and two-inch photos?

One-inch prints are 25×35 mm and often appear on ID cards, exam forms and small certificates. Two-inch prints are 35×49 mm and give more room around the shoulders, which some visa and archive forms prefer. The names refer to the printed width in inches, not to the pixel count, so a two-inch file is not automatically higher resolution than a one-inch file.

Does 600 DPI guarantee the photo will be accepted?

No. DPI only sets the pixel count for a given printed size. Acceptance depends on head size, background colour, expression, lighting and the rules of the specific office. A sharp 300 DPI photo that follows every instruction is better than a blurry 600 DPI one. Treat the DPI control as a technical setting, not as proof of compliance.

Can I use a phone photo for an official document?

Usually yes, if the light is even, the background is plain and the camera is at eye level. Avoid selfies taken at arm's length with a strong window behind you, because the face ends up in shadow. A portrait from a friend, taken at about two metres against a wall, gives better proportions and enough pixels for a 300 DPI print.

Why does my exported photo look different from the preview?

The preview is scaled to fit your screen and includes the selection overlay, while the download is rendered at the exact print pixels. Check the output size label rather than the on-screen size. If the exported file looks softer, the source photo was probably smaller than the target pixels; upload a larger original and repeat the crop.

Is my photo uploaded anywhere?

No. The image is read by your browser, drawn on a local canvas and exported on your device. Only the optional AI model files are downloaded from this site; the photo itself never leaves the machine. That makes the tool suitable for personal documents, though you should still avoid using public computers for sensitive files.

Related Tools